Electroplated Metallic Powder Coatings

• Highly decorativeCan provide single and double coating series 
• Different color surface effects can provide saw colorsRed, green, yellow, blackBlue and other colors
• Green and environmentally friendly, without formaldehyde emission
• Excellent construction stability, reusable multiple times, and minimal color difference during construction

Application areas

All kinds of metal substrates such as indoor furniture, household appliances, fitness equipment, etc.

Application Instructions

1. Curing conditions: 200 ℃/10 minutes or 180 ℃/10 minutes; To ensure uniform curing of the coating, it is best to have a uniform temperature distribution in the baking oven; And control the curing temperature and time reasonably according to the condition of the workpiece.
2. Pretreatment: Workpieces must undergo pretreatment before spraying. Aluminium alloys should comply with the requirements of Chapter 4 surface pretreatment in GB/T8013.3, and steel and its alloys should comply with the requirements of Standard 1S012944-4.
3. Workpiece hangin: When hanging workpieces, hang them reasonably according to the shape and thickness of the workpieces to increase the powder coating rate and yield; Also pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing in and affecting the surface effect of the coating film.
4. Powder coating：Select reasonable process parameters. The environment for powder coating should preferably have a temperature and humidity control sys tem. The optimal temperature for powder coating is 15-25 ° C, and the relative air humidity in the powder coating chamber should preferably be 45% to 55%.
5. TDouble coating requires a combination of base powder and flour.
6. Recommended coating thickness: On a fully cured and qualified electroplated silver sample (recommended film thi cknes s of 6080 μ m), spray transparent flour again (recommended film thickness of 60-80 μ m). If the surface coating is too thin, it will cause uneven leveling, lighter color, lower brightness, and increased gloss; Excessive thickness can easily lead to shrinkage holes
7. During the coating formation process, the color is slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.

Product packaging and storage

Powder coatings are packed in hard cartons and lined with plastic bags, with net weight of 25KG and 20KG per carton. They should be stored in an environment with a temperature below 25 ° C and kept in a well-ventilated and dry storage environment
Dry and keep away from direct sunlight on the powder. The place where the powder is stored should not be close to fire sources and should be kept away from heat source

Safety measures

This product is non-flammable and non-explosive, basically non-toxic, do not swallow.

▲ The instructions regarding the use of our products are based on our current level of knowledge and are intended to facilitate the customer 's choice of our products. Despite these instructions, the customer is still responsible for whether the product complies with other requirements, processing procedures or purposes. Since we have no control over the use, application or processing of the product, we cannot be held responsible